The Command Access LPM180 mortise lock utilizes a high quality Grade 1 chassis built to withstand years of abuse. This unique model brings latch retraction to a standard mortise lockset. Requiring no special door prep, this is the perfect solution for push-pull conditions, handicap access, and for automatic operators where panic devices are not necessary. The LPM180 takes advantage of out patented PM200 technology, allowing for favorable wire runs and multiple locks on one power supply. It is field handible and available in Fail Secure (EU) functionality. This mortise lock uses standard ‘type 86’ door prep and can retrofit to Schlage L9000 compatible trim. We offer this model as chassis only or with complete trim.Models Available:LPM180 (storeroom) – Latchbolt retracted electronically (EU), by key outside or by lever inside. Switched power retracts latchbolt for push/pull operation. Outside lever always rigid. Inside lever always free for immediate egress.Trims Available: L3, L6, L17 with 2-7/16" rosettesFinishes available: 613, 625, 626Features: No special lock prep required – fits standard mortise pocket prepped for a Schlage “L” series lock Utilizes our patented PM/PWM200 technology Circuitry allow for momentary or continuously on “push/pull” applications May be controlled by Command Access PS1N, PS5-4 and PS5-6 power supplies Available is complete locksets or in chassis only (retrofits to Schlage “L” series compatible trim) No hassle 3-Year WarrantySpecifications: Operating Voltage – 24VAC/DC (+/- 10%) Surge Current Amperage - 12A for 200ms@24V Holding Current Amperage - 250mA@24V Solenoid coil resistance – 1.75 Ω Power consumption – 8 watts voltage - 24VDC
