The Command Access ML1 series lock offers the quality and features found in premium-quality, domestically made ANSI grade 1 mortise locks, yet at a significantly lower cost. The electrification and part tolerance maintenance is done here in the USA to ensure CAT’s high quality standards are met. The ML1’s chassis and trim are compatible with the Schlage “L” series locks so retrofitting to Schlage prep is never a problem.Models Available:ML180 (storeroom) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.ML182 (institutional) – Outside and inside levers simultaneously locked (EL) or unlocked (EU) electronically. Latchbolt retracted by key on either side. Switched power allows both levers to retract latchbolt.ML170 (classroom) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt retracted lever on either side unless outside has been locked by key. Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.ML1480 (entry w/deadbolt) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt and deadbolt. Inside lever is always free for immediate egress.ML1485 (privacy w/deadbolt) - Outside lever unlocked (EU) electronically. Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt unless deadbolt is thrown. Inside lever is always free for immediate egress. Available in EU (electronically unlocked) function onlyTrims Available: L3, L6, L17 with 2-7/16" rosettesFinishes available: 613, 625, 626Features: UL Listed Continuous duty solenoids allow for “continuously on” applications such as Fail Safe or an unlock cycle Plug-in bridge rectifier that allows for an AC or DC power source Low current draw Compatible with Schlage “L” series mortise trim. No hassle 3-Year WarrantyOptions: Available Fail Safe (Electrically Locked) or Fail Secure (Electrically Unlocked) Voltage options - 12V or 24V(AC/DC) REX - Request to Exit or AE switch available LBM - Latchbolt Monitor switch available DPS - Door Position switch available DBM - Deadbolt Monitor switch available SLM - Solenoid Monitor switch available SCM - Security Monitor switch available CRU2 - Current Reduction Unit to improve solenoid life in “continuously on” applications CRU2i - The intelligent CRU2: automatically detects DC input voltage between 12 to 30 volts and converts it to operate our 12V locks. Additionally, it adjusts the current to the solenoid allowing the lockset to run cooler and last longer without any manual adjustments.Specifications: Operating Voltage – 12 or 24VAC/DC (+or- 10%) (must specify 12 or 24 volts when ordering) Amperage – 12V = 700 mA / 24V = 350mA Solenoid coil resistance – 12V = 18 Ω 24V = 69 Ω Power consumption – 8 watts
